Back to Top
We offer a range of System 2000 fittings for PE and PVC pipes, Flanges, Couplings, Duckfoot Bends and End Caps.

  • Using a lip seal ring for sealing the pipe allows for easier insertion of the pipe into the System 2000 socket
  • The pipe restraining system is required for pushing the pipe into the seal and chamfer with an appropriate tool
  • For PE pipes with thin walls (≥ SDR 21) and low internal pressure we recommend using a support liner
  • Suitable for PE pipes 80/100, EN 12201, DIN 8074
  • For PVC pipes according to EN ISO 1452-2
  • System 2000 Fittings

    System 2000 - Flange for PE and PVC pipes

    With push socket for high-tensile restraint connection with PE and PVC pipes
  • Flange sized according to EN 1092-2, drilled according to
  • EN 1092-2 | PN 10 standard; EN 1092-2 | PN 16 DN 200 to DN 600 please specify on order
  • other standards on request
  • With integrated flange seal made of elastomer
  • For DN50 to DN600

  • System 2000 : Coupling No. 0430

    With push socket for high-tensile restraint connection with PE and PVC pipes
  • With integrated flange seal made of elastomer
  • For Ø63mm to Ø355mm


  • Caution! When using as coupling valve: remove stop ring and steeply chamfer pipe (see assembly instructions)

    System 2000 End Cap No 8075

    Available with or without axial or radial thread outlet 1" - 2"

    Benefits
  • For Ø63mm to Ø315mm
  •