Process Displays for Analogue Signals
Process Displays for Analogue Signals Range
MJK 531 / 532 / 533
MJK Digital indicators are used for indication of measured values. The indicators are supplied with LCD or LED display for panel or local mounting (IP 65). The instruments have a window in which the symbol for the engineering unit is shown. A pre-printed sheet with the common engineering units is supplied together with the indicator.
Calibration and adjustment are made on the back of the indicator. There is a built-in circuit for simulation of the 0-point and span so adjustment can be made without using measuring and test equipment. The indicators have pluggable terminals for quick service.
Calibration and adjustment are made on the back of the indicator. There is a built-in circuit for simulation of the 0-point and span so adjustment can be made without using measuring and test equipment. The indicators have pluggable terminals for quick service.
Siemens RD 200
The SITRANS RD200 is a universal input, panel mount remote digital display for process instrumentation. The RD200 is a universal remote display for level, flow, pressure, temperature, weighing, and other process instruments. Data can be remotely collected, logged and presented from as many as 100 displays on your local computer using the free downloadable RD Software.
The display accepts a single input of current, voltage, thermocouple, and RTD. This makes the RD200 an ideal fit for use with most field instruments. The RD200 can be set up as a standard panel mount, or combined with optional enclosures to allow it to house up to 6 display
The display accepts a single input of current, voltage, thermocouple, and RTD. This makes the RD200 an ideal fit for use with most field instruments. The RD200 can be set up as a standard panel mount, or combined with optional enclosures to allow it to house up to 6 display
Simex SRP-94
The SRP-94 meter is designed for measuring of typical current or voltage signals. The readouts are presented on well-readable display with standard range of four digits. Thanks to wide range of characteristic curves (linear, square root, quadratic, user-defined and volume characteristic for cylindrical tanks) the meters may be used in various process control systems. The 24V DC / 100 mA output is designed to supply measuring transducers, and the RS-485 port enables data transmission in production process monitoring systems.
The REL / OC control outputs can adjust the level of measured signal and are controlled according to one or two threshold values. Moreover, the meter can be equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The meter can be configured with the local keyboard or free S-Config software via the RS-485 communication port.
The REL / OC control outputs can adjust the level of measured signal and are controlled according to one or two threshold values. Moreover, the meter can be equipped with analogue outputs, according to the customer selection: active current output, passive isolated current output or active voltage output. The meter can be configured with the local keyboard or free S-Config software via the RS-485 communication port.
Simex SRP-N118
Meter in tight (IP 67), wall mounting case, with current-voltage input, 2 relay (or OC type) outputs and 1 analogue output, according to the customer selection: active current output, passive isolated current output or active voltage output.
The meter may be configured with no need to open the case, by using the remote controller or with free S-Config software via the RS-485 communication port
The meter may be configured with no need to open the case, by using the remote controller or with free S-Config software via the RS-485 communication port
