The SOLABEL is a thoroughly tested solar powered Belisha beacon, designed for reliable off -grid installation. Featuring a low impact design solar panel, advanced
technology batteries and a low energy LED beacon light engine, the SOLABEL is designed to operate all year round. The SOLABEL is supplied complete with prefinished post, beacon and solar engine.
SOLAR ENGINE
Solar Panel - 750 mm diameter, mono crystalline panel with 12 V, 60 Watt output.
Impact resistance IK10. Solar panel set at 22°.
Solar Panel Housing
Rotationally moulded U.V stabilised (UV8) black polyethylene moulding with galvanised steel support pillar powder coated black.
Battery - 4 x 12 V / 9 Ah Absorbent Glass Mat (AGM) batteries mounted in the base compartment of the post.
Regulator - High efficiency PWM regulator mounted in post base.
Ingress Protection - IP54
LED BEACON
Beacon - 335mm diameter, self coloured, rotationally moulded, U.V stabilised (UV15), low density polyethylene, 2.5mm nominal wall thickness.
Gallery - Die Cast LM6-M aluminium, acid cleaned, chromate primed and polyester powder coated black (150μm min). High performance gasket at beacon interface. All threads stainless steel bushed. Pre-fitted stainless steel shroud fi xing points.
Light Engine - Custom LED driver driving LED's with a consumption of 3.4 watts when lit. LED driver efficiency 90%. Integrated flash controller. Short circuit and open circuit protection.
Light Output - 350 cd/m2 with uniformity > 0.66.
Ingress Protection - IP54
Impact resistance IK10. Solar panel set at 22°.
Rotationally moulded U.V stabilised (UV8) black polyethylene moulding with galvanised steel support pillar powder coated black.
